Diversey Taski Vectra F2n

Scrub and Recoat Floor Finish

Designed For:

• Interior surfaces only. Not suitable for exterior or vertical surfaces.
• Floors previously finished with paste wax should be thoroughly stripped before application.
• Not recommended for wood, cork, or concrete floors.
• Suitable for use on surfaces with temperatures above 50 ºF.

General Usage:

• Applying Floor Finish:

  1. Strip floor using a Diversey brand stripper as per label directions.
  2. Apply 2-3 coats using a clean mop. Apply additional coats if a higher gloss is desired.
  3. Allow approximately 30 minutes drying time between coats. Drying time may vary based on temperature, humidity, and ventilation.

• Maintenance:

  1. Dust mop or sweep the floor.
  2. Clean the floor using a mop or automatic scrubber with a recommended Diversey brand cleaner.
  3. For enhanced gloss, spray buff or high-speed spray buff with an appropriate Diversey brand floor maintainer.

• Recoating:

  1. Dust mop or sweep the floor.
  2. Deep scrub the floor with a recommended Diversey brand cleaner.
  3. Apply 1-2 coats using a clean mop.

Technical Data:

• Form/Color: Aqueous Solution, Opaque, White
• Fragrance: Product Specific
• Flash Point: ≈ 93.4°C
• Relative Density: 1.03 g/cm³ (20°C)
• pH (neat): ≈ 8.6
• Solubility: Fully miscible in water

Safe Handling:

Full guidance on handling and disposal is provided in a separate Safety Data Sheet. For professional use only.

Storage Information:

Store in original closed containers away from extremes of temperature.

Contact Information:

Distributed By:
DYNADVANCE TRADING AND DISTRIBUTION (DTDI) INC.
www.beyondhygiene.net
Phone: 02 8252 0958 / 02 7005 8338